Media Player

Installation and Setup Guide

Supported Model

C4-MP2-E Media Player V2

Speciﬁcations

This Control4

Media Player V2 operates as part of a Control4 Home-

Automation System to enable easy navigation and playback of video

media. The player installs on a ﬂat surface or on a wall behind a

wall-mounted TV, and communicates with other devices through a

Control4 Controller.

Model: C4-MP2-E

Media Recognition: Video ﬁles on a network-at-

tached storage drive

Display: LED indicators

Power Requirements: 12VDC 1.3A MAX

Dimensions: H x W x D: 2” x 9 1/8” x 7”

Weight: 2.0 pounds

Communications: 100BaseT Ethernet

WARNING! To reduce the risk of electrical shock, do not expose

this apparatus to rain or moisture.

Important Safety Instructions

1. Read and keep these instructions.

2. Heed all warnings.

3. Follow all instructions.

4. Do not use this apparatus near water.

5. Clean only with a dry cloth.

6. Install in accordance with the manufacturer’s instructions.

7. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliﬁers) that

produce heat.

8. Protect the power cord from being walked on or pinched, par-

ticularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

9. Only use attachments/accessories speciﬁed by the manufac-

turer.

10. Refer all servicing to qualiﬁed service personnel. Servicing is re-

quired when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has

been dropped.

Box Contents

Carefully unpack the contents from the box, and make sure the fol-

lowing items are included:

• Control4 Media Player V2

• Power supply

• Control4 Media Player Installation and Setup Guide (this docu-

ment)

• Control4 Media Player User Guide

Requirements

Control4 Components:

• A Controller fully installed and conﬁgured with a Control4 project

(for the homeowner). The Media Player communicates with these

Controllers via an IP connection (Ethernet).

• Control4 Composer Pro software (Professional Edition for the

Control4 Dealer) for initial project setup.

• Control4 Composer software (Media Edition or Home Edition for

homeowners—optional) for initial and future scanning of video

ﬁles.

• Prior to installing this product, ensure that a wired Ethernet net-

work is in place.

• IP connected (Ethernet) network-attached storage drive where

video content is stored.

Additional Resources

The following resources are available to provide you with additional

support.

• Control4 web site: http://www.control4.com

• Control4 Dealer web site: http://www.control4.com/dealer

• Control4 Knowledgebase: http://www.control4.com/knowledge-

base

• Composer Pro Getting Started and Composer Pro User Guide

Back View

Introduction to Control4 Media Player

A key component of the Control4 vision to automate, control, and

provide entertainment throughout the home is the Control4 Media

Player—a device that plays back video ﬁles from the home network.

Using the Control4 Media Player with the Control4 system allows

customers to view their video ﬁles on their TV and eliminates the

need to watch them on their computer. The Control4 system already

allows users to browse cover art and play back their DVD and

Blu-ray™ discs from any Control4 Navigator. With the addition of the

Control4 Media Player, now users also can navigate and play their

video ﬁles from the same user interface.

IMPORTANT! Before you install the device, refer to “Important

Safety Instructions” in this document.

1. Power port

2. Left/Right Audio

3. Component Video (YPbPr)

4. Composite Video

5. Digital Audio Output S/PDIF (Optical)

6. S-Video

7. USB ports (used only for software upgrades)

8. HDMI

9. 100BaseT Ethernet

Front View

1. Link—This LED glows Blue when the Media Player has been iden-

tiﬁed in a Control4 Composer project and is communicating with

the Controller. The Link button also serves as the ID button.

2. Power—This LED glows Blue when the power is on.

1 2

1 2 3 4 5 6 7 8 9

Add and Identify the Media Player

to the Project

Note: The Documentation tab in the driver’s Properties page contains

some valuable information about the Player that you should consider

during installation. Refer to this page as needed.

1. Use the Composer Pro software to add and identify the Media

Player to the Control4 system. Refer to the Composer Pro User

Guide for details.

2. When you identify the device in Composer, press the Link LED on

the front of the device to identify it to the system.

Installation Instructions

Before you install the Media Player, ﬁrst determine where you will

place the device. It can be installed in a rack, mounted on the wall, or

placed on a ﬂat surface near the TV or other A/V equipment.

Installing on a ﬂat surface:

1. Place the Media Player on a ﬂat surface or in a rack.

2. Connect the Media Player to the home network.

3. Determine which A/V connections you will use, and connect the

Media Player directly to the TV, Receiver or Video Switch,

Connect Power.

Mounting on a wall:

1. Place the Media Player upside down on a ﬂat surface.

2. Remove the rubber feet from the bottom of the device to expose

the mounting holes.

3. If a ﬂat-screen TV is mounted to the wall, remove the TV from

the wall.

4. Use the template provided (see “Wall Mount Template” on the

next page) to mark on the wall where the wall anchors are to be

installed for the Media Player.

Note: We recommend that the Media Player be mounted using

wall anchors to ensure that it is not inadvertently pulled from the

wall.

5. Install four (4) wall anchors to the wall directly behind the ﬂat-

screen TV. (Mount the Media Player on the side closest to the AV

connections. See the next step.)

6. Attach the Media Player to the wall anchors.

7. Connect the Media Player to the home network.

8. Determine which A/V connections you will use, and connect the

Media Player directly to the TV, Receiver or Video Switch,

Connect Power.

9. Mount the TV to the wall.

Note: You can use the Composer Pro software to step through the

connection process before or after the physical connections are

completed.

Tips:

For audio, you have three (3) options:

1. Audio and Video are both available through the HDMI connector.

2. S/PDIF. If the TV or Receiver supports this connector, use this

one.

3. Left/Right audio. Note: DTS audio is available only via HDMI or

S/PDIF.

For video:

Connect to the TV, Receiver or Video Switch. Note: If you connect

HDMI, all other video ports will be disabled.

Scan the Media in Composer

Note: A network-attached storage drive must be conﬁgured to work

in your project and showing online in Composer.

1. Use the Composer software (Media Edition, Home Edition, or the

Media view in the Professional Edition) to identify videos that

you want the Media Player to be able to play. You can add videos

manually, or Composer can scan network-attached storage

locations to add video ﬁles automatically.

2. In Composer, click the Media view.

3. Select the network-attached storage drive where the videos are

located, and then click the Scan or New button. Scan will auto-

matically identify some types of video ﬁles (normally ISO and

IFO/VOBS ﬁles in a videoTS folder). Other types of video ﬁles

can be added using the New button. This action automatically

updates the Navigators and provides cover art (if available) for

easy video recognition.

4. For videos that haven’t been identiﬁed in the scan process, use

the New function to add the videos manually.

Additional details for advanced functions, such as adding your own

cover art, are available in the Composer Pro User Guide.

IMPORTANT! Only use the power supply included in this box.

Note: Peel o the protective ﬁlm from the front of the device.

1 2

Indice de contenidos

Pagina 1 - Installation and Setup Guide

Media Player Installation and Setup GuideSupported Model C4-MP2-E Media Player V2SpeciﬁcationsThis Control4® Media Player V2 operates as part of a

Pagina 2 - Supported Power Supplies

WarrantyFor information about this product’s warranty, visit www.control4.com/war-ranty.Regulatory ComplianceNorth AmericaFCC/Industry CanadaThis devi

Mas documentos para Equipo de grabación Control4 Media Controller

a Ver el documento Control4 Media Controller Guía de instalación

Control4 Media Controller Guía de instalación (6 paginas)

Control4 Media Controller Guía de instalación (7 paginas)

a Ver el documento Control4 Media Controller Guía de usuario

Control4 Media Controller Guía de usuario (160 paginas)

Control4 Media Controller Guía de usuario (54 paginas)

Comentarios a estos manuales

Sin comentarios

Frigidaire P/N 134296400A (0404) manuales

Manuales del propietario y guías del usuario para Secadores Frigidaire P/N 134296400A (0404).
Ofrecemos 1 manuales en pdf Frigidaire P/N 134296400A (0404) para descargar gratis por tipos de documentos: Manual de usuario

Frigidaire P/N 134296400A (0404) Manual de usuario (9 paginas)

Marca: Frigidaire | Categoria: Dryers | Tamaño: 0.30 MB |

Tabla de contenidos

Installation

Instructions

EXHAUST SYSTEM REQUIREMENTS

PRE-INSTALLATION REQUIREMENTS

ELECTRICAL REQUIREMENTS

GAS SUPPLY REQUIREMENTS

LOCATION OF YOUR DRYER

ROUGH-IN DIMENSIONS

MOBILE HOME INSTALLATION

ELECTRICAL INSTALLATION

GROUNDING REQUIREMENTS

ELECTRICAL CONNECTIONS

FOR 3-WIRE SYSTEM

FOR 4-WIRE SYSTEM

INSTALLATION

REPLACEMENT PARTS

Más productos y manuales para Secadores Frigidaire

Modelos	Tipo de documento
137102300	Manual de usuario FRIGIDAIRE 137102300 User Manual, 8 paginas
134763300A	Manual de usuario FRIGIDAIRE 134763300A User Manual, 8 paginas
137112300B	Manual de usuario FRIGIDAIRE 137112300B Manuel d'utilisation, 48 paginas
137135200A	Manual de usuario FRIGIDAIRE 137135200A User Manual, 9 paginas
134431300D	Manual de usuario FRIGIDAIRE 134431300D User Manual, 6 paginas
AFFINITY FASG7073L R/N/A/W	Manual de usuario FRIGIDAIRE AFFINITY FASG7073L R/N/A/W User Manual, 2 paginas
134296400	Manual de usuario FRIGIDAIRE 134296400 User Manual, 22 paginas
FDE/FDG647RF	Manual de usuario FRIGIDAIRE FDE/FDG647RF User Manual, 2 paginas
FITS-MORE FAQE7073K W/B/R/N/A	Manual de usuario FRIGIDAIRE FITS-MORE FAQE7073K W/B/R/N/A User Manual, 2 paginas
134420700A	Manual de usuario FRIGIDAIRE 134420700A User Manual, 8 paginas
134674500B	Manual de usuario FRIGIDAIRE 134674500B User Manual, 8 paginas
134145400A	Manual de usuario FRIGIDAIRE 134145400A User Manual, 2 paginas
GLGQ2170KE	Manual de usuario FRIGIDAIRE GLGQ2170KE User Manual, 48 paginas
137118600B	Manual de usuario FRIGIDAIRE 137118600B User Manual, 18 paginas
137135000B	Manual de usuario FRIGIDAIRE 137135000B User Manual, 18 paginas
FAQE7017K	Manual de usuario FRIGIDAIRE FAQE7017K User Manual, 2 paginas
137196700A	Manual de usuario FRIGIDAIRE 137196700A User Manual, 11 paginas
AFFINITY FAQG7011K W/B/R	Manual de usuario FRIGIDAIRE AFFINITY FAQG7011K W/B/R User Manual, 2 paginas
137118100A	Manual de usuario FRIGIDAIRE 137118100A User Manual, 9 paginas
FAQG7011KB	Manual de usuario FRIGIDAIRE FAQG7011KB User Manual, 2 paginas

Control4 Media Controller Guia de preparacion